Tips I'd wish I had known before remodelling my kitchen

Example of a kitchen cooker hood
One renovator shares her story and the before and after photos of her kitchen so that you may benefit from her accomplishments and mistakes.
I finally rebuilt my kitchen this spring after years of fantasizing about it. Because this was my first restoration job, I donned my reporter's hat and conducted considerable research, interviewing everyone I could think of about their kitchen renovation experiences. While I had to learn some things the hard way, I eventually obtained the kitchen I wanted, complete with a dishwasher-garbage-sink work triangle (which is life-changing! ), a large island, and a heated tile floor (I cry with joy every morning when I walk on it).

Any restoration budget approach should include mixing and matching expensive products with less expensive ones like I did. For instance, I settled with a basic refrigerator and dishwasher so that I could upgrade to a six-burner, restaurant-quality range, and I chose manufactured quartz over real marble so that I could go with modern matte black cabinetry.

When it comes to the makeover itself, keep in mind that doing dishes in the bathtub gets old fast, renovations are stressful, and everything will end up costing more and taking longer than you anticipated. From my experience, here are some things I learned:

Get design assistance from an expert.

A kitchen designer will know tactics that you won't, so inquire about their fees: Is there a charge for the design plus a markup on everything you buy, and can you place your orders to save money? (Ask the same questions as your contractor.) Also, look for design assistance in unexpected places: After three design blunders, I learned that Riverhead Building Supply in East Hampton, New York, has a kitchen design center, and their design was free and fantastic (thank you, Cori Schramm!). I ordered mid-priced, semi-custom cabinets - as well as my countertop - from them, and I was able to buy everything else (often on sale) at other stores on my own. The expert will most likely make suggestions that would never cross your mind, for example, I was suggested that I should use a copper range hood, and I absolutely loved the idea.

Accept the fact that living without a kitchen will be extremely inconvenient.

I bemoaned not having a kitchen every morning as I sat at the bottom of my living room steps to boil and pour coffee. However, demolition of the old kitchen should be done ahead of time to ensure the most precise measurements for the new one. "You're making cabinets to fit the space you have," explains Tim Clarke, a designer based in California. "You want to make the most of every inch, figure out where hidden pipes are so you can eliminate them, and uncover unanticipated issues early so they can be fixed."

Early on, decide on your appliances and sink.

Appliances have a significant impact on design. Don't merely measure their breadth while planning: Check the depth and allow for circulation around door openings, especially the side of the refrigerator, which may require up to three inches of space to completely open inside drawers. Also, don't scrimp on ventilation: Many people overlook the requirement for a vent or underestimate the strength required (a heavy-duty range needs a heavy-duty hood!). It's also a good idea to start looking for a sink as soon as possible, as it's just as crucial as your appliances.

I had to relocate the dishwasher from its original placement because of my large undermount Franke 60-40 split stainless steel - an crucial early-stage choice. Find an appliance retailer that will let you buy ahead of time but keep them until you're ready to install them because appliances are the last to be installed.

Make only one show-stopping design decision.

Give your kitchen character, but don't make it into a circus with several spotlight things. My major draw was a French Mediterranean-style cement tile floor, so I went with simple cabinet and countertop options, as well as a white tile backsplash. This is particularly significant in compact places.

Make a dry run using the tiles.

My expensive tile floor was causing me a lot of problems. I received a sample, which I liked, but when we unloaded the large container containing my whole purchase, just a couple of the items were identical to the chalky sample. (I discovered after the event that tiles, like textiles, have dye lots and color variations.) "Place all of the tiles out first before they are stuck in place," Clarke said if you have the same issue. "You can conceal the bad ones beneath the cabinets or mix them up so there isn't a line of a different hue if there are differences from tile to tile."

Take into account the cleaning.

The amount of time you spend cleaning afterward will be influenced by your design decisions. Keep an eye out for things that will become dirty; for example, open shelves surrounding the range look great, but grease splatters will require frequent cleaning of the objects sitting on them. To prevent water from coloring your grout, run a line of silicone over the seam between the counter and backsplash behind the sink (they make it to match grout colors). Remember to plan where you'll put the garbage and recyclables, which must be accessible to your prep area and sink.

CHSSP course further information

Copyright 2008 - 2023   HSC Design Ltd. 128 City Road, London. EC1V 2NX Company reg: 6576986 UK Tel: +44 (0)333 800 8001